Interface for Dot-Matrix LCDs 0.8
⇒ back to Project Page

/home/msk/projekte/software/lib/lcd/include/port_definitions.h File Reference

Port Settings (Definitions, Association) More...

Go to the source code of this file.

Defines

#define LCD_PORT   PORTD
 Controller Port for LCD Output.
#define LCD_DDR   DDRD
 DDR Register of Controller Port for LCD Output.
#define LCD_RS   PD2
 Pin for RS (Register Select)
#define LCD_RW   PD1
 Pin for R/W (Read/Write)
#define LCD_EN   PD3
 Pin for E (Enable)
#define LCDBL_PORT   PORTB
 Controller Port for Backlight Pin.
#define LCDBL_DDR   DDRB
 DDR Register of Controller Port for LCD Backlight.
#define LCDBL_CTRL   PB0
 Pin for Backlight.
#define LCD_DB4   PD4
 Pin for D4 (Data, Bit 4)
#define LCD_DB5   PD5
 Pin for D5 (Data, Bit 5)
#define LCD_DB6   PD6
 Pin for D6 (Data, Bit 6)
#define LCD_DB7   PD7
 Pin for D7 (Data, Bit 7)

Detailed Description

Port Settings (Definitions, Association)

Author:
Michael Skutek
Date:
09.01.2010
Version:
0.8

Platform: AVR ATmega (tested on ATmega16)

This program is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

Definition in file port_definitions.h.

 All Files Functions Variables Defines