Interface for Dot-Matrix LCDs 0.8
⇒ back to Project Page

/home/msk/projekte/software/lib/lcd/include/port_definitions.h

Go to the documentation of this file.
00001 /****************************************************************************/
00032 #ifndef PORT_DEFINITIONS_H_INCLUDED
00033 #define PORT_DEFINITIONS_H_INCLUDED
00034 
00035 
00036 
00037 
00038 
00039 /******************************************
00040         \internal
00041         Pin Settings: LCD
00042 *******************************************/
00043 
00044 /******************************************************************************
00045         \internal
00046 Typical LCD Pinout (WITHOUT WARRANTY - READ DOCUMENTATION!):
00047 
00048   Symbol              Pin No.         Description
00049 
00050     Vss                 1               Ground
00051     Vdd                 2               Supply Voltage for Logic
00052     Vo                  3               Supply Voltage for LCD
00053     RS                  4               Register Select (RS=0: Instruction
00054                                                          Register,
00055                                                          RS=1: Data Register)
00056     R/W                 5               Read/Write (R/W=0: write, R/W=1: read)
00057     E                   6               Enable
00058     D0 to D7          7 to 14           Bi-directional Data Bus
00059     BL-                15               Backlight supply terminal (Anode)
00060     BL+                16               Backlight supply terminal (Cathode)
00061 ******************************************************************************/
00062 
00063 
00064 #define LCD_PORT                     PORTD          //!< Controller Port for LCD Output
00065 #define LCD_DDR                       DDRD          //!< DDR Register of Controller Port for LCD Output
00066 #define LCD_RS                         PD2          //!< Pin for RS (Register Select)
00067 #define LCD_RW                         PD1          //!< Pin for R/W (Read/Write)
00068 #define LCD_EN                         PD3          //!< Pin for E (Enable)
00069 
00070 #define LCDBL_PORT                   PORTB          //!< Controller Port for Backlight Pin
00071 #define LCDBL_DDR                     DDRB          //!< DDR Register of Controller Port for LCD Backlight
00072 #define LCDBL_CTRL                     PB0          //!< Pin for Backlight
00073 
00074 #define LCD_DB4                        PD4          //!< Pin for D4 (Data, Bit 4)
00075 #define LCD_DB5                        PD5          //!< Pin for D5 (Data, Bit 5)
00076 #define LCD_DB6                        PD6          //!< Pin for D6 (Data, Bit 6)
00077 #define LCD_DB7                        PD7          //!< Pin for D7 (Data, Bit 7)
00078 
00079 
00080 
00081 #endif // PORT_DEFINITIONS_H_INCLUDED
 All Files Functions Variables Defines